Revel Voice 2 Manuel d'utilisateur télécharger pdf (Page 16)

Ultima Voice2

Owner’s Manual

Voice2 Combination Spikes/Glides

When the Voice2 is shipped, reversible spikes/glides are located

in the left end pad. For optimal sound quality, they can be

positioned in the cast feet on the bottom of the cradle assembly.

The combination spike/glides allow for the achievement of a

proper tilt angle when the Voice2 is placed on top of a video

monitor, or on top of a shelf. For best results, the Voice 2 should

be tilted so that the front of the speaker is facing directly towards

the listener’s ears. The spikes/glides should be positioned so

that the smooth “glide” end is exposed to protect tile,

hardwood floors and furniture.

To install and position the Combination spikes/glides:

1. Place the speaker on its side on a soft towel or carpeted floor.

2. Select the appropriate end of the spikes/glides depending on

your surface. If the speaker is to be used on a hardwood floor

or smooth surface use the glide end of the spike.

3. Locate the four feet and threaded inserts on the bottom of the

cradle feet.

4. Rotate the first spike counterclockwise, spike end first, to

attach it to the threaded insert.

5. Repeat step 4 with each of the other crade feet spikes and

threaded inserts. Make sure the spikes are evenly threaded to

achieve a level balance.

6. When all four spikes have been installed, stand the speaker

in the upright position. If needed, adjust the spikes to achieve

a level balance.

Figure 9: Combination Spike/Glide Components

Figure 10: Combination Spike/Glide Detail

Caution

When moving the Voice2, avoid dragging it across the floor or

cabinet. If the Voice2 is placed on a carpeted floor, the spikes

should be adjusted as shown on the left side of Figure 10 with

the sharp end protruding from the cabinet. If needed, follow

the instructions that begin below to adjust the spikes

Felt Washer

Locking Ring

Spike

(Spike End Down)

Spike End Down Glide End Down

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 33 34

Pas de commentaire

Revel Voice 2 Manuel d'utilisateur Page 16